Rent Tektronix THS720A Oscilloscope


The Tektronix THS720A oscilloscope is a graph-displaying device – it draws a graph of an electrical signal. In most applications, the graph shows how signals change over time: the vertical (Y) axis represents voltage and the horizontal (X) axis represents time. The intensity or brightness of the display is sometimes called the Z axis.

The Tektronix THS720A oscilloscope’s simple graph can tell you many things about a signal, such as: the time and voltage values of a signal, the frequency of an oscillating signal, the “moving parts” of a circuit represented by the signal, the frequency with which a particular portion of the signal is occurring relative to, other portions, whether or not a malfunctioning component is distorting the signal, how much of a signal is direct current (DC) or alternating current (AC) and how much of the signal is noise and whether the noise is changing with time.

The THS720A shares measurement features with the THS730A, THS720P Oscilloscope/DMMs, which are ideal for electronic applications.

Features & Benefits

100 MHz Bandwidth
500 MS/s Sampling Rates per Channel
Two Channels and Dual Digitizers
External Trigger
33/4 Digit DMM with Datalogger
Roll Mode
Extra Bright Backlit Display
8 ns Glitch Capture
Independently Floating Isolated Oscilloscope and DMM Channels for Safety
Full Floating Measurement Capability up to 600 VRMS
Advanced Trigger – Delay, Pulse and Video (Line Count and Field Select)
21 Automatic Measurements
RS-232 Programmability/ Communications
NiCd Battery and AC Adapter

Rent  THS720A


Field or Bench Electronic Troubleshooting
Floating (Nongrounded) System Measurements

Oscilloscope Functions

Bandwidth: 100 MHz
Sample Rate (each channel): 500 MS/s
Channels: Two
Sensitivity: 5 mV to 50 V/div (to 500 V/div with 10X probe).
Position Range:  ±10 div.
DC Gain Accuracy:  ±2%.
Vertical Resolution: 8-Bits.
Record Length: 2500 points.
Horizontal Accuracy: ±200 ppm.
Roll Mode: = 0.5 s/div.
Autorange: User-selectable.
Trigger Modes: Auto, Normal.
Trigger Types: Edge, Pulse, Video, External.
Video Trigger Formats and Field Rates: Odd field, even field and line.
External Trigger Input: 5 MHz TTL compatible.
Waveform Processing: Add, Subtract, Multiply, Calculate Watts = V x I.
Waveform Storage: 10 waveforms.
Acquisition Modes: Sample, Envelope, Average, Peak Detect.
Cursor Measurements: delta Volts, ? Time, 1/? Time (Hz), Degree (phase).
Cursor Types: Horizontal Bars, Vertical Bars, Paired (volts @ time).
Display System: Interpolation: Sin(x)/x. Format: YT and XY. Mode: Vector, Dot, Vector Accumulate, Dot Accumulate.

Rent Tektronix THS720A

DMM Specifications

DC Voltage Ranges: 400.0 mV to 880 V.
DC Volts Accuracy: ±(0.5% of reading + 5 counts).
True RMS AC Voltage Ranges: 400.0 mV to 640 V.
Maximum Float Voltage: 600 VRMS CAT II, each channel (probe dependent).
Resolution: 4000 count, 3-3/4 digits.
AC Volts Accuracy: ±(2% of reading + 5 counts).
Resistance Ranges: 400.0 O to 40.00 MO.
Resistance Accuracy: ±(0.5% of reading + 2 counts); 40 MO: ±(2% of reading + 5 counts).
Diode Test Range: 0 to 2 V.
Continuity Check: Audible tone when < 50 O.
Modes: Min, Max, ?, Max-Min, Avg, Hold.
Nonvolatile Storage: 10 DMM screenshots.
External Trigger Input: 5 MHz TTL compatible.
Vertical Zoom Capability: 2X, 5X, 10X.
dB Scale: Selectable, referenced from 1 mV to 10 V.
dBm Scale: Selectable, referenced from 50 O to 600 O.

General Specifications

Setups: 10 front-panel setups.
Safety: UL3111-1, CSA1010.1, EN61010-1, IEC61010.1.
EMC: Meets Directive 89/336/EEC.
Power: NiCd rechargeable battery pack with AC adapter (both included).
Battery Life: Approx. 2 hours from full charge.
Display: Backlit LCD.
Display Resolution: 320 x 240.

Physical Characteristics

Width: 177 mm
Height: 217 mm
Depth: 51 mm
Weight: Net 1.45 kg

Lease Tektronix THS720A Oscilloscope Rental